FRP equipment and components for water treatment

PRODUCT / FRP PRESSURE TANKS

FRP Pressure Tanks for Filtration, Softening and Storage

Hedelong lists composite vessels for filtration media, softening systems and water storage. Start with the contents, operating pressure, opening style and service access, then confirm the selected model.

Discuss a Tank Specification
Standard FRP composite pressure tank

STANDARD COMPOSITE SERIES

Core Materials and Listed Range

The standard composite tank series uses a food-grade HDPE liner with epoxy resin and fiberglass winding reinforcement. The listed diameter range is 6 to 80 inches. Opening options include threaded and flanged connections.

Pressure and temperature values below refer to the documented product series. Confirm the exact vessel, fitting and test record before final selection.

SpecificationListed Range or ConstructionSelection Note
Diameter6–80 inConfirm model dimensions and installation envelope
Operating pressure125 psi and 150 psi optionsRating varies by series and configuration
Operating temperature1–49°C (34–120°F)Check the selected model and service medium
Liner and reinforcementFood-grade HDPE liner; epoxy resin and fiberglass windingWetted materials and chemical compatibility need review
ConnectionsThreaded and flange optionsOpening type, thread and flange dimensions are model-specific
Cycle testingMore than 100,000 cycles listed for a 0–150 psi testRequest the relevant test record for the quoted model

TANK CONFIGURATIONS

Compare the Main Vessel Types

ConfigurationDocumented FeatureTypical Selection Point
Standard composite tankThread or flange openings; 6–80 in diameter rangeMedia, tank size, pressure and valve interface
Side-loading / loading-unloading portUpper and lower 6 in flanges with 4 in loading or discharge port options in the listed seriesMedia replacement access and clearance around the vessel
Top-opening tank40 mm head opening with an integrated O-ring sealManual media loading and maintenance access
Central-integration tank7, 8 and 10 in tank sizes listed for combined purification and softening stagesSmall systems needing separate media stages in one unit
Special-shaped or nitrogen-sealed tankNon-standard openings and vessel forms can be discussed; large nitrogen-sealed tanks are made to specificationSend a drawing, duty conditions and storage requirements

Application examples describe product configurations, not a guarantee of suitability. Final compatibility depends on the water chemistry, media, model and operating conditions.

QUOTE CHECKLIST

Details That Help Confirm the Right Tank

Water or media stored in the vessel

Normal and maximum pressure, temperature and operating cycles

Diameter, height, base support and available service space

Top, side, threaded or flanged opening arrangement

Required certificates, inspection documents and delivery scope

MODEL-SPECIFIC CONFIRMATION

Share the Media, Pressure and Opening Requirements

Contact Us